CFD analysis of blast furnace operation
Thermal analyses and sensitivity study of pyrolysis reactor equipment
Validation of Reynolds stress models in a combustion chamber
AFTUR: Alternative fuels for industrial gas turbines (EU project)
Analysis of thermostatic shower valves
Development of a novel baby bottle concept
Modelling of the PCM solidification process in a baby bottle warmer
Mechanically powered light - development and evaluation of the design concepts
Design of a compact fan system with heat recuperation
Melting of phase-change material using microwaves
Thermo-mechanical analysis of ITER residual ion dump
Structural assessment of ITER microwave heating antenna
Blow-out transient simulation for ITER NBDI duct liner
Development of a cooling configuration for a high power electric motor
Analysis and design development of a Peltier-based cooling system
Fluid-structure interaction analysis of shield deflection of a microwave antenna
Thermal performance of air heaters in the aircraft ventilation system
Fluid-structure interaction analysis of an air heater due to thermal stresses
Thermal management within a Chemical Warfare Agent (CWA) detector
Particle behaviour in an agricultural spreader system and their ground surface distribution
CFD analysis of the Kings' cross accident
FireNet: under-ventilated compartment fires (EU project)
Influence of thermal radiation on ventilation conditions in a building
Thermal loads due to a fire on a cargo ship
Safedor: design, operation and regulation for safety
Computational models for prediction of fire behaviour (training)
External airflow and its impact on the building ventilation
Evaluation of an alternative HVAC strategy using phase-change materials
Design validation of a clean room air handling system
Thermo-hydraulic analysis of a novel domestic heating system
Wake formation behind the submarine fin and analysis of the resulting structural loads
Development of cooling configuration for a battery compartment of a rigid inflatable boat
Analysis of buffeting flow and its control on a high speed boat
Water stability of a boom towing device
Engineering review of inhaler technology and atomisation methodologies
Flow characteristics and film clearing potential of a novel endoscope attachment
Droplets behaviour and concept design development of a spray measuring device
Simulation of natural convection in fluids with internal heat generation
Development of design criteria for fluid induced vibrations in heat exchangers
WAHALoads: Two-phase flow water hammer transients and induced loads on materials and structures of nuclear power plants (EU project)
Original combined multiphase model of steam explosion premixing phase
Fluid-elastic instability in heat exchanger tube bundles
Thermal loads on the reactor vessel lower plenum during a severe accident
Determination of morphological parameters for optimization of heat exchanger surfaces
Assessment & development of a novel borehole device
Assessment of erosion in a drill-head for oil-wells
Vortex induced vibration of a deep water riser
Concept design of a supersonic gas compressor
Analysis of a cold plasma methane cracking reactor and carbon removal process
Feasibility assessment of vibration energy harvester
Validation of a CFD methodology to analyse wind turbine blades
Simulation of wind turbine operation using blade element method
Optimisation of a wind farm layout
Forecasting of heat extraction rate for a ground source heating system
Hydraulic design of ground source heat exchanger
Setup of borehole temperature monitoring
Analysis of a thermal storage system for a solar power plant module
